We – EPG Team the largest gearbox & motors , couplings and gears manufacturing unit in China with 5 different branches. For far more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
Powder Conical Double Conical Screw Mixer
Brief INTRODUCTION:
The PerMix PNA series Conical Screw Mixer is a batch mixing tools employed broadly in mixing apps that need mild mixing with minimal product distortion, nominal warmth generation, and quite exact mixing homogeneity. Since it was 1st produced far more than sixty many years ago, it has been recognized as a excellent solution for the products which is fragile, warmth sensitive or tending to segregate.
Owing to the explanation the PerMix Conical Screw Mixer makes use of the gravity to generate the considerable downward massflow, it saves vitality when compared with a horizontal mixer.
These Conical Screw Mixers are also highlighted with no contamination to the solution in the course of the mixing, owing to the fact that the shaft sealing & bearing is over the wor ept area, as a result no contact with the solution.
HOW IT Operates:
Inside of the PerMix Conical Screw Mixer, there is a cantilevered rotating screw (or two, a few screws in accordance to specified application) rotating by its very own axle which is in parallel to and in close proximity to the wall of the cone vessel. The mixing screw lifts the product about it from bottom to the best, and then the powder falls down owing to the gravity, leading to a convective mixing.
At the exact same time, the screw is supported by an orbital arm and is rotating about the centre of the cone like a planetary, so that the powders in each and every corner of the cone can be mixed by the screw, and a 3-dimentional mixing overall performance occurs inside of the complete cone.
Choices:
– Feeding & Discharging
A variety of feeding & discharging methods accessible.
– Screw Type
We offer single screw, double screw and triple screw to give diverse mixing intensity.
– Drive system
Travel technique by geared motor, cycloidal reducer, worm reducer, belt or chain transmission, etc.
– Development Substance and End
We are ready to supply our PVR Mixers with get in touch with part to be developed in Carbon metal, SS304, SS316/316L, Titanium, Duplex stainless steel, Hastelloy, etc. End of inside and exterior complete can be uninteresting polished, one hundred eighty grit polished (food grade), or mirror polished. For abrasive supplies we offer hardened steel as the get in touch with component.
– Spray nozzle
Liquid can be included into the powder by spray nozzles on the prime.
– Heating/Cooling jacket
Jacketed trough for heating/cooling operation
– Vacuum drying & deaerating
PNA Conical Screw Mixers can be created to a vacuum mixer dryer for vacuum drying & deaerating or for inner pressure wor ept for unique applications.
Applications:
– Animal Care
Animal Feeds, Chicken Fattening Feed, Fish Food items, Mineral Feed, Pet Meals, Poultry Feed, Rabbit Feed, Veterinary Medication
– Substances
Adhesives, Carbon Black, Dyestuff, Electrode Mass, Fly Ashes, Fungicides, Peat Moss Mixes, Pesticides, Prescription drugs, Pigments, Plastic Additives, Resins, Solid Lubricants
– Day-to-day Treatment
Aromas, Cat Box Litter, Cleansers, Detergents, Potpourri
– Creating Supplies
Decorative Paste Coatings, Dry Mortar Mixes, Fibre Cement Cladding, Gypsum, Joint Compounds, Thermal Insulation Composite
Technical specs of Conical Screw Mixer:
| Design | Overall quantity (liter) |
Wor ept volume (liter) |
Power (*) (kW) |
RPM | Dia. (mm) |
H, total top (**) (mm) |
Inlet (***) (mm) |
Outlet (****) (mm) |
Fat (kg) |
| PNA-200 | 200 | 120 | 2.2+.37 | 140/2 | 888 | 1557 | a hundred and forty | 230 | five hundred |
| PNA-300 | 300 | one hundred eighty | 2.2+.37 | one hundred forty/2 | 990 | 1722 | a hundred and eighty | 230 | 550 |
| PNA-five hundred | 500 | three hundred | three+.fifty five | a hundred and forty/2 | 1156 | 1991 | 200 | 230 | 600 |
| PNA-800 | 800 | 480 | 4+.55 | 60/2 | 1492 | 2256 | 250 | three hundred | 950 |
| PNA-1000 | 1000 | 600 | four+.55 | 60/two | 1600 | 2432 | three hundred | 300 | 1200 |
| PNA-1500 | 1500 | 900 | five.5+.seventy five | sixty/2 | 1780 | 2725 | three hundred | 300 | 1350 |
| PNA-2000 | 2000 | 1200 | five.5+.seventy five | 60/two | 1948 | 3001 | 350 | 350 | 1500 |
| PNA-2500 | 2500 | 1500 | 7.5+1.five | sixty/two | 2062 | 3571 | 350 | 350 | 1800 |
| PNA-3000 | 3000 | 1800 | seven.5+1.five | sixty/2 | 2175 | 3207 | 350 | 350 | 2100 |
| PNA-4000 | 4000 | 2400 | eleven+2.2 | forty/two | 2435 | 4571 | 400 | 400 | 2500 |
| PNA-5000 | 5000 | 3000 | fifteen+2.two | 40/2 | 2578 | 4260 | 400 | 400 | 3000 |
| PNA-6000 | 6000 | 3600 | eighteen.5+three | forty/two | 2715 | 4470 | 400 | four hundred | 3500 |
| PNA-8000 | 8000 | 4800 | 22+3 | 40/1.3 | 2792 | 5000 | four hundred | 450 | 3800 |
| PNA-ten thousand | ten thousand | 6000 | 30+4 | forty/1.3 | 3000 | 5240 | five hundred | 450 | 4300 |
1. (*) (**) (***) (****): Adjustments are accessible in accordance to the customer’s ask for.
2. Customized measurements available as per ask for
three. All technical specs and illustrations are as accurate as is reasonably attainable, but they are not binding.
4. PerMix reserves the proper to modify the layout without having discover.
Equipment Specifics:
Our Consumers:
A lot more Products by PerMix:
PerMix Positive aspects:
FAQ:
Q: What is your price tag amount compared with European suppliers and nearby Chinese suppliers?
A: Depending on the machine sort and dimensions, our price amount is thirty%-sixty% much less than the European suppliers and 5-15% larger than the massive nearby suppliers.
Q: Are you capable to give tailor-produced design and style and generation for the mixers?
A: Yes, in truth far more than fifty percent of our mixers are tailor produced, which is a single of our powerful details.
Q: Are you able to layout and create other processing gear?
A: We are open up to discuss about it.
Q: Can you provide equipment to OEM clients, meaning to label their brand names on the machines.
A: Indeed we are undertaking it a whole lot. We have a number of OEM partners in the United states.
Q: Do you have agent community out of China?
A: Of course we do have agents but only in some nations around the world, for case in point in Usa, Germany, Poland, Spain, Denmark, Turkey, Argentina, etc. We are even now bathroom ept for much more brokers because we imagine to work with brokers is the ideal way to do organization.
Q: What is your delivery guide time of the mixing gear.
A: Relying on the measurement and level of customization, but normally it is from 6-14 weeks.
Q: How do you pack and ship the mixing machines?
A: For equipment never need complete container loading, we will pack them in wood case. For FCL (entire container loading) cargo, we will just wrap the machines in plastic films and repair them in the container. The shipment can be either by air or by sea
The use of original products manufacturer’s (OEM) portion numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our business and the listed substitute components contained herein are not sponsored, accepted, or manufactured by the OEM.
