Tag Archives: axle gear

China Manufacturer Contour Half Shaft Axle Gear Wheel Gear for Heavy Truck Intermediate Axle bevel gear set

Merchandise Description

Merchandise Identify: OEM/ODM Motor Equipment

Motor Equipment Production Plant of Xihu (West Lake) Dis.Feng Motor Corporation(DFM23)

Worldwide OEM provide to CZPT and Volvo worldwide.

 

Engine Gear Plant of DFM (DFM23 for quick) was established in 1969, which is a huge production base for auto parts. We have excellent areas and components technological innovation advancement abilities many thanks to our benefit of robust device and R&D ability.

Staff: There are 795 personnel in DFM23 and 156 of them are complex engineers.

Tools:  The plant owns much more than 852  devices, such as 103 advanced machines which had been imported.

 

Forging and machinining Gear:

Quality Check Equipment:
 

 

Certifications:

ISO9001(2004)
ISO/TS16949(2004.eleven)
ISO14000(2005.3)
OHSASI18000(2005.3)
ASES(2571.ten)

 

Solution Advancement Capability:

Strong technical energy for equipment wheel method optimization style, noise reduction, power examine and so on.

Fast Reaction R&D with Client.                                                 

Full Top quality Handle Self Layout/ Self manufactured tooling                

 

Informatization Technology Utilized in Plant:

PMS & ERP & MES system appear into services in March 2017.

Technical Patents/ Intellectual House:

Now we possess 12 patents.

New Technology Applications:

Anti-use phosphating Shot Peen Substantial speed Hobbing Higher velocity tooth grinding Steady heat remedy
Honing Hole Difficult turning Interior hole and end-experience grinding.

 

Equipment Solution Improvement Strategy:

 

International Supply to Cummins
 

We give almost 200 types of gears for CZPT worldwide fifteen OEM crops & cooperative partners, 3 spare components provider middle, products go over 2.8L-95L.

At existing, we are sole provider for 45L previously mentioned large-responsibility motor gear Supply optimized style proposal for CZPT motor equipment, participate in R&D and other complex assistance and comprehensive provider potential.

 

We manufature in accordance to customer’s drawings and needs,
 

Type of Gears We can provide:
 

Equipment Crankshaft / Equipment Camshaft / Gear Fuel pump / Gear Air compressor / Equipment from transferring

 

Materials:
 

20CrMnTiH, 20CrMo, 20MnCr5, SAE8620H, 17CrNiMo7-6

 

Fat(kg): .6-30

 

Dimension(mm): fifty-360

 

Gear Precision: ISO6 Stage

To Be Negotiated 3,000 Pieces
(Min. Order)

###

Application: Motor, Electric Cars, Car
Hardness: Hardened Tooth Surface
Gear Position: Internal Gear
Manufacturing Method: Forging+Machining
Toothed Portion Shape: Spur Gear
Material: Forging Gear

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
To Be Negotiated 3,000 Pieces
(Min. Order)

###

Application: Motor, Electric Cars, Car
Hardness: Hardened Tooth Surface
Gear Position: Internal Gear
Manufacturing Method: Forging+Machining
Toothed Portion Shape: Spur Gear
Material: Forging Gear

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

Helical, Straight-Cut, and Spiral-Bevel Gears

If you are planning to use bevel gears in your machine, you need to understand the differences between Helical, Straight-cut, and Spiral bevel gears. This article will introduce you to these gears, as well as their applications. The article will also discuss the benefits and disadvantages of each type of bevel gear. Once you know the differences, you can choose the right gear for your machine. It is easy to learn about spiral bevel gears.
gear

Spiral bevel gear

Spiral bevel gears play a critical role in the aeronautical transmission system. Their failure can cause devastating accidents. Therefore, accurate detection and fault analysis are necessary for maximizing gear system efficiency. This article will discuss the role of computer aided tooth contact analysis in fault detection and meshing pinion position errors. You can use this method to detect problems in spiral bevel gears. Further, you will learn about its application in other transmission systems.
Spiral bevel gears are designed to mesh the gear teeth more slowly and appropriately. Compared to straight bevel gears, spiral bevel gears are less expensive to manufacture with CNC machining. Spiral bevel gears have a wide range of applications and can even be used to reduce the size of drive shafts and bearings. There are many advantages to spiral bevel gears, but most of them are low-cost.
This type of bevel gear has three basic elements: the pinion-gear pair, the load machine, and the output shaft. Each of these is in torsion. Torsional stiffness accounts for the elasticity of the system. Spiral bevel gears are ideal for applications requiring tight backlash monitoring and high-speed operations. CZPT precision machining and adjustable locknuts reduce backlash and allow for precise adjustments. This reduces maintenance and maximizes drive lifespan.
Spiral bevel gears are useful for both high-speed and low-speed applications. High-speed applications require spiral bevel gears for maximum efficiency and speed. They are also ideal for high-speed and high torque, as they can reduce rpm without affecting the vehicle’s speed. They are also great for transferring power between two shafts. Spiral bevel gears are widely used in automotive gears, construction equipment, and a variety of industrial applications.

Hypoid bevel gear

The Hypoid bevel gear is similar to the spiral bevel gear but differs in the shape of the teeth and pinion. The smallest ratio would result in the lowest gear reduction. A Hypoid bevel gear is very durable and efficient. It can be used in confined spaces and weighs less than an equivalent cylindrical gear. It is also a popular choice for high-torque applications. The Hypoid bevel gear is a good choice for applications requiring a high level of speed and torque.
The Hypoid bevel gear has multiple teeth that mesh with each other at the same time. Because of this, the gear transmits torque with very little noise. This allows it to transfer a higher torque with less noise. However, it must be noted that a Hypoid bevel gear is usually more expensive than a spiral bevel gear. The cost of a Hypoid bevel gear is higher, but its benefits make it a popular choice for some applications.
A Hypoid bevel gear can be made of several types. They may differ in the number of teeth and their spiral angles. In general, the smaller hypoid gear has a larger pinion than its counterpart. This means that the hypoid gear is more efficient and stronger than its bevel cousin. It can even be nearly silent if it is well lubricated. Once you’ve made the decision to get a Hypoid bevel gear, be sure to read up on its benefits.
Another common application for a Hypoid bevel gear is in automobiles. These gears are commonly used in the differential in automobiles and trucks. The torque transfer characteristics of the Hypoid gear system make it an excellent choice for many applications. In addition to maximizing efficiency, Hypoid gears also provide smoothness and efficiency. While some people may argue that a spiral bevel gear set is better, this is not an ideal solution for most automobile assemblies.
gear

Helical bevel gear

Compared to helical worm gears, helical bevel gears have a small, compact housing and are structurally optimized. They can be mounted in various ways and feature double chamber shaft seals. In addition, the diameter of the shaft and flange of a helical bevel gear is comparable to that of a worm gear. The gear box of a helical bevel gear unit can be as small as 1.6 inches, or as large as eight cubic feet.
The main characteristic of helical bevel gears is that the teeth on the driver gear are twisted to the left and the helical arc gears have a similar design. In addition to the backlash, the teeth of bevel gears are twisted in a clockwise and counterclockwise direction, depending on the number of helical bevels in the bevel. It is important to note that the tooth contact of a helical bevel gear will be reduced by about ten to twenty percent if there is no offset between the two gears.
In order to create a helical bevel gear, you need to first define the gear and shaft geometry. Once the geometry has been defined, you can proceed to add bosses and perforations. Then, specify the X-Y plane for both the gear and the shaft. Then, the cross section of the gear will be the basis for the solid created after revolution around the X-axis. This way, you can make sure that your gear will be compatible with the pinion.
The development of CNC machines and additive manufacturing processes has greatly simplified the manufacturing process for helical bevel gears. Today, it is possible to design an unlimited number of bevel gear geometry using high-tech machinery. By utilizing the kinematics of a CNC machine center, you can create an unlimited number of gears with the perfect geometry. In the process, you can make both helical bevel gears and spiral bevel gears.

Straight-cut bevel gear

A straight-cut bevel gear is the easiest to manufacture. The first method of manufacturing a straight bevel gear was to use a planer with an indexing head. Later, more efficient methods of manufacturing straight bevel gears were introduced, such as the Revacycle system and the Coniflex system. The latter method is used by CZPT. Here are some of the main benefits of using a straight-cut bevel gear.
A straight-cut bevel gear is defined by its teeth that intersect at the axis of the gear when extended. Straight-cut bevel gears are usually tapered in thickness, with the outer part being larger than the inner portion. Straight-cut bevel gears exhibit instantaneous lines of contact, and are best suited for low-speed, static-load applications. A common application for straight-cut bevel gears is in the differential systems of automobiles.
After being machined, straight-cut bevel gears undergo heat treatment. Case carburizing produces gears with surfaces of 60-63 Rc. Using this method, the pinion is 3 Rc harder than the gear to equalize wear. Flare hardening, flame hardening, and induction hardening methods are rarely used. Finish machining includes turning the outer and inner diameters and special machining processes.
The teeth of a straight-cut bevel gear experience impact and shock loading. Because the teeth of both gears come into contact abruptly, this leads to excessive noise and vibration. The latter limits the speed and power transmission capacity of the gear. On the other hand, a spiral-cut bevel gear experiences gradual but less-destructive loading. It can be used for high-speed applications, but it should be noted that a spiral-cut bevel gear is more complicated to manufacture.
gear

Spur-cut bevel gear

CZPT stocks bevel gears in spiral and straight tooth configurations, in a range of ratios from 1.5 to five. They are also highly remachinable except for the teeth. Spiral bevel gears have a low helix angle and excellent precision properties. CZPT stock bevel gears are manufactured using state-of-the-art technologies and know-how. Compared with spur-cut gears, these have a longer life span.
To determine the strength and durability of a spur-cut bevel gear, you can calculate its MA (mechanical advantage), surface durability (SD), and tooth number (Nb). These values will vary depending on the design and application environment. You can consult the corresponding guides, white papers, and technical specifications to find the best gear for your needs. In addition, CZPT offers a Supplier Discovery Platform that allows you to discover more than 500,000 suppliers.
Another type of spur gear is the double helical gear. It has both left-hand and right-hand helical teeth. This design balances thrust forces and provides extra gear shear area. Helical gears, on the other hand, feature spiral-cut teeth. While both types of gears may generate significant noise and vibration, helical gears are more efficient for high-speed applications. Spur-cut bevel gears may also cause similar effects.
In addition to diametral pitch, the addendum and dedendum have other important properties. The dedendum is the depth of the teeth below the pitch circle. This diameter is the key to determining the center distance between two spur gears. The radius of each pitch circle is equal to the entire depth of the spur gear. Spur gears often use the addendum and dedendum angles to describe the teeth.

China Manufacturer Contour Half Shaft Axle Gear Wheel Gear for Heavy Truck Intermediate Axle     bevel gear setChina Manufacturer Contour Half Shaft Axle Gear Wheel Gear for Heavy Truck Intermediate Axle     bevel gear set
editor by czh 2023-01-08

China Original Sdlg 3050900021 Half Axle Gear Price for LG936L/LG938L Wheel Loader bevel gearbox

Merchandise Description

Original CZPT 30509    Fax:   Cellular:
Web site: ZheJiang weiyang 

US $9-15
/ Set
|
1 Set

(Min. Order)

###

Type: Half Axle Gear
Application: Wheel Loader
Certification: ISO9001: 2000
Condition: New
Part No: 3050900021
Name: Half Alxe Gear
US $9-15
/ Set
|
1 Set

(Min. Order)

###

Type: Half Axle Gear
Application: Wheel Loader
Certification: ISO9001: 2000
Condition: New
Part No: 3050900021
Name: Half Alxe Gear

Hypoid Bevel Vs Straight Spiral Bevel – What’s the Difference?

Spiral gears come in many different varieties, but there is a fundamental difference between a Hypoid bevel gear and a Straight spiral bevel. This article will describe the differences between the two types of gears and discuss their use. Whether the gears are used in industrial applications or at home, it is vital to understand what each type does and why it is important. Ultimately, your final product will depend on these differences.
Gear

Hypoid bevel gears

In automotive use, hypoid bevel gears are used in the differential, which allows the wheels to rotate at different speeds while maintaining the vehicle’s handling. This gearbox assembly consists of a ring gear and pinion mounted on a carrier with other bevel gears. These gears are also widely used in heavy equipment, auxiliary units, and the aviation industry. Listed below are some common applications of hypoid bevel gears.
For automotive applications, hypoid gears are commonly used in rear axles, especially on large trucks. Their distinctive shape allows the driveshaft to be located deeper in the vehicle, thus lowering the center of gravity and minimizing interior disruption. This design makes the hypoid gearset one of the most efficient types of gearboxes on the market. In addition to their superior efficiency, hypoid gears are very easy to maintain, as their mesh is based on sliding action.
The face-hobbed hypoid gears have a characteristic epicycloidal lead curve along their lengthwise axis. The most common grinding method for hypoid gears is the Semi-Completing process, which uses a cup-shaped grinding wheel to replace the lead curve with a circular arc. However, this method has a significant drawback – it produces non-uniform stock removal. Furthermore, the grinding wheel cannot finish all the surface of the tooth.
The advantages of a hypoid gear over a spiral bevel gear include a higher contact ratio and a higher transmission torque. These gears are primarily used in automobile drive systems, where the ratio of a single pair of hypoid gears is the highest. The hypoid gear can be heat-treated to increase durability and reduce friction, making it an ideal choice for applications where speed and efficiency are critical.
The same technique used in spiral bevel gears can also be used for hypoid bevel gears. This machining technique involves two-cut roughing followed by one-cut finishing. The pitch diameter of hypoid gears is up to 2500 mm. It is possible to combine the roughing and finishing operations using the same cutter, but the two-cut machining process is recommended for hypoid gears.
The advantages of hypoid gearing over spiral bevel gears are primarily based on precision. Using a hypoid gear with only three arc minutes of backlash is more efficient than a spiral bevel gear that requires six arc minutes of backlash. This makes hypoid gears a more viable choice in the motion control market. However, some people may argue that hypoid gears are not practical for automobile assemblies.
Hypoid gears have a unique shape – a cone that has teeth that are not parallel. Their pitch surface consists of two surfaces – a conical surface and a line-contacting surface of revolution. An inscribed cone is a common substitute for the line-contact surface of hypoid bevel gears, and it features point-contacts instead of lines. Developed in the early 1920s, hypoid bevel gears are still used in heavy truck drive trains. As they grow in popularity, they are also seeing increasing use in the industrial power transmission and motion control industries.
Gear

Straight spiral bevel gears

There are many differences between spiral bevel gears and the traditional, non-spiral types. Spiral bevel gears are always crowned and never conjugated, which limits the distribution of contact stress. The helical shape of the bevel gear is also a factor of design, as is its length. The helical shape has a large number of advantages, however. Listed below are a few of them.
Spiral bevel gears are generally available in pitches ranging from 1.5 to 2500 mm. They are highly efficient and are also available in a wide range of tooth and module combinations. Spiral bevel gears are extremely accurate and durable, and have low helix angles. These properties make them excellent for precision applications. However, some gears are not suitable for all applications. Therefore, you should consider the type of bevel gear you need before purchasing.
Compared to helical gears, straight bevel gears are easier to manufacture. The earliest method used to manufacture these gears was the use of a planer with an indexing head. However, with the development of modern manufacturing processes such as the Revacycle and Coniflex systems, manufacturers have been able to produce these gears more efficiently. Some of these gears are used in windup alarm clocks, washing machines, and screwdrivers. However, they are particularly noisy and are not suitable for automobile use.
A straight bevel gear is the most common type of bevel gear, while a spiral bevel gear has concave teeth. This curved design produces a greater amount of torque and axial thrust than a straight bevel gear. Straight teeth can increase the risk of breaking and overheating equipment and are more prone to breakage. Spiral bevel gears are also more durable and last longer than helical gears.
Spiral and hypoid bevel gears are used for applications with high peripheral speeds and require very low friction. They are recommended for applications where noise levels are essential. Hypoid gears are suitable for applications where they can transmit high torque, although the helical-spiral design is less effective for braking. For this reason, spiral bevel gears and hypoids are generally more expensive. If you are planning to buy a new gear, it is important to know which one will be suitable for the application.
Spiral bevel gears are more expensive than standard bevel gears, and their design is more complex than that of the spiral bevel gear. However, they have the advantage of being simpler to manufacture and are less likely to produce excessive noise and vibration. They also have less teeth to grind, which means that they are not as noisy as the spiral bevel gears. The main benefit of this design is their simplicity, as they can be produced in pairs, which saves money and time.
In most applications, spiral bevel gears have advantages over their straight counterparts. They provide more evenly distributed tooth loads and carry more load without surface fatigue. The spiral angle of the teeth also affects thrust loading. It is possible to make a straight spiral bevel gear with two helical axes, but the difference is the amount of thrust that is applied to each individual tooth. In addition to being stronger, the spiral angle provides the same efficiency as the straight spiral gear.
Gear

Hypoid gears

The primary application of hypoid gearboxes is in the automotive industry. They are typically found on the rear axles of passenger cars. The name is derived from the left-hand spiral angle of the pinion and the right-hand spiral angle of the crown. Hypoid gears also benefit from an offset center of gravity, which reduces the interior space of cars. Hypoid gears are also used in heavy trucks and buses, where they can improve fuel efficiency.
The hypoid and spiral bevel gears can be produced by face-hobbing, a process that produces highly accurate and smooth-surfaced parts. This process enables precise flank surfaces and pre-designed ease-off topographies. These processes also enhance the mechanical resistance of the gears by 15 to 20%. Additionally, they can reduce noise and improve mechanical efficiency. In commercial applications, hypoid gears are ideal for ensuring quiet operation.
Conjugated design enables the production of hypoid gearsets with length or profile crowning. Its characteristic makes the gearset insensitive to inaccuracies in the gear housing and load deflections. In addition, crowning allows the manufacturer to adjust the operating displacements to achieve the desired results. These advantages make hypoid gear sets a desirable option for many industries. So, what are the advantages of hypoid gears in spiral gears?
The design of a hypoid gear is similar to that of a conventional bevel gear. Its pitch surfaces are hyperbolic, rather than conical, and the teeth are helical. This configuration also allows the pinion to be larger than an equivalent bevel pinion. The overall design of the hypoid gear allows for large diameter shafts and a large pinion. It can be considered a cross between a bevel gear and a worm drive.
In passenger vehicles, hypoid gears are almost universal. Their smoother operation, increased pinion strength, and reduced weight make them a desirable choice for many vehicle applications. And, a lower vehicle body also lowers the vehicle’s body. These advantages made all major car manufacturers convert to hypoid drive axles. It is worth noting that they are less efficient than their bevel gear counterparts.
The most basic design characteristic of a hypoid gear is that it carries out line contact in the entire area of engagement. In other words, if a pinion and a ring gear rotate with an angular increment, line contact is maintained throughout their entire engagement area. The resulting transmission ratio is equal to the angular increments of the pinion and ring gear. Therefore, hypoid gears are also known as helical gears.

China Original Sdlg 3050900021 Half Axle Gear Price for LG936L/LG938L Wheel Loader     bevel gearboxChina Original Sdlg 3050900021 Half Axle Gear Price for LG936L/LG938L Wheel Loader     bevel gearbox
editor by czh 2022-11-29

in San Luis Potosi Mexico sales price shop near me near me shop factory supplier Truck Rear Axle Crown Wheel Pinion Gear for Truck Transmission manufacturer best Cost Custom Cheap wholesaler

  in San Luis Potosi Mexico  sales   price   shop   near me   near me shop   factory   supplier Truck Rear Axle Crown Wheel Pinion Gear for Truck Transmission manufacturer   best   Cost   Custom   Cheap   wholesaler

The large exact CNC tools, these kinds of as Gradual-feeding wire-reduce machine, jig grinding machine and electric powered discharge machine, assures the leading high quality precision of mould processing, with the substantial productive and environmental defense acid rolling line getting the largest raw content converting gear in the discipline in china The wildly use of automated milling equipment, higher-velocity automatic feeding punch, high velocity automated rolling and assembling machine assures the substantial high quality and performance of factors and chain producing. With numerous years’ knowledge in these lines, we have been distinguished from other suppliers in China by our benefits in competitive pricing, on-time supply, prompt responses, on-hand engineering help and great right after-sales solutions. Wonderful interest has been paid out on environmental safety and vitality saving.
EPT Rear axle crown wheel pinion EPT For EPT EPTT

Our EPT can be stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd as for each European or American stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd or EPTT as for each your drawing or sample.

Functions:

#9830 EPT: carbon metal these kinds of as C45, 20CrMnTi, 40Cr, 42CrMo or stainless steel or copper or EPT and so on

#9830 Warmth Therapy: Hardening and Tempering, EPT Frequency Quenching, Carburizing Quenching and so on.

#9830 StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd: European or American stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd

#9830 Merchandise: M0.5,M1 .M1,five,M1,seven,M2,M2.5,M3,M4,M5,M6 and so on

#9830 Export Location: Europe and America

#9830 OEM support: make based mostly on your EPTT sample or drawing and meet your require for high precision on teeth of EPT

Excellent quality with reasonable price tag, well timed shipping and delivery and excellent customer services.

We can also supply spur EPT,EPTT EPTs, worm EPT,worm wheel,EPT spiral EPTTl EPTs, massive spur EPTs,EPTs wheel,straigEPTT EPTTl EPTs, helical EPTTl EPTs,spur EPTs,planetary EPTs, passive EPTs, milled spur EPTs, EPT for valve,
EPT EPT, EPTT spur EPT,spur bearing EPT, EPT pinions,galvanized EPT ect accessible. StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd or EPTT EPTs created by CNC EPTT

We create EPT as for each your EPTT samples or drawing and we also produce as for each stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd such as Metric stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd, British stXiHu (West EPT) Dis.Hu (West EPT) Dis.rds, AGMA stXiHu (West EPT) Dis.Hu (West EPT) Dis.rds by CNC EPTT

EPT can be C45, 40Cr, 20CrMnTi, 42CrMo, copper, stainless metal and so on as per your requests

There is substantial precision obtainable as your EPTT request

Our EPT is exported to Europe and The united states in large amount and so we are confident that we can support you get fantastic good results!

EPTT wheel pinion, crown wheel and pinion, crown wheel amp pinion, crown wheel EPTs, crown pinion, pinion and crown wheel, crown pinion suppliers, EPTT Wheel Pinion EPT, EPTT EPTT Wheel Pinion EPT, pinion and crown wheel
We have previously exported our products for much more than twenty years, as a skilled provider, we have more than 200 kinds of ring and pinion EPT, they are for car, bus and EPT, our primary market place incEPTT Europe, The usa, Middle EPT, SouthEPT Asia, Africa and Russia, We achieve great status with certain good quality and aggressive value.
See the beneath our crown wheel and pinion kinds for verify, if any want, remember to do not wait to contact with US.
MITSUBISHI EPTT Wheel Pinion MB005252 6X37 4D31/PS100/canter
MB161192 6X40 4D31/PS100/canter
MC835114/MC863589 6X37 4D34/PS120/canter
MB863590 6X40 4D34/PS120/canter
MITSUBISHI crown wheel and pinion PS190 6D16 FM517 MB839939 6X40 PS190/FUSO
FM517 MC817479 6X37 PS190/FUSO
FM517 MC-839938-A 6*forty three
MITSUBISHI 120S L300G MB527152 7X37
MITSUBISHI 4D55 L300D MB241981 7X37
MITSUBISHIPS135 MC57131 6X37
6*forty
MITSUBISHI T120 4G41 MT57164 7X37
MITSUBISHI PS100 4D31 MB308059 STAR Gear
MB308115 EPTT Gear
MB161186 Vary
MITSUBISHI PS100 4D34 Vary
MITSUBISHI PS100 MB 308116 EPTT Equipment
MB 308115 STAR Equipment
MITSUBISHI PS120 MC825365 EPTT Gear
MC 835982 STAR Gear
MITSUBISHI PS100 COUTER SEPTFT ME-603213
MITSUBISHI PS120 COUTER SEPTFT ME-603214
MITSUBISHI COUTER SEPTFT ME-604431
ME-60571
MC866747 8X39
MC805654
MITSUBISHI 8DC9 Entrance MC804124 6X40 6D22/FUSO
MITSUBISHI 8DC9 REAR MC804120 6X40 6D22/FUSO
MITSUBISHI 8DC9 FV313FR 12571-55040 6X41
MITSUBISHI 8DC9 FV313RR 12571-90040 6X41
MITSUBISHI 6D15 MC806120 6X40 FN516/FUSO
MITSUBISHI FP320 MC831408 MID(Middle) 7X39 6D40
MC831408REAR(REAR) 7X39 6D40
MITSUBISHI FP415 MC827154REAR(REAR) 7X39 8DC11/FUSO
MC827154MID(Middle) 7X39 8DC11/FUSO
MC834742(SPLINE/22) 8X39
MC834990(SPLINE/twenty) 8X37
MC834996/MC836736/MC834991 (SPLINE/twenty) 8X39
ME508242 7X39
6X41
MITSUBISHI 6D22 Entrance MC8571/808508 6X45 FN527/GENZO
MITSUBISHI 6D22 REAR MC57154(MC809464/808505) 6X45 FN527/GENZO
MB598487 8X39
MR179199 11X51
MR162750 11X51
EPTta crown wheel and pinion RINO EPTT 41201-85719 7X45
EPTta RINO fourteen-B 41201-39495 6X39
41201-39495-S 6X41
EPTta RINO LT 41201-80187 6X35
41201-85717/16HOLES 6*35
EPTta HILUX EPTT Wheel Pinion 41201-39696 8X39
41201-29536-S 9X41
41201-87613 11X39
41201-87615 11X37
EPTta COASTER crown wheel EPTs 6X35 MEPTBUS
6X37 MEPTBUS
6X41 MEPTBUS
7X39 MEPTBUS
8X41 MEPTBUS
EPTta LAND CRUISER 41201-69355 9X37
41201-69167
EPT EPTT Wheel Pinion 8-97063573- 10X41
8-94225-258-one 9X41
one-4121571- 7X43
one-41210464- 7X43
EPT NKR eight-97047-092-1 6X41
EPT NPR 8-97571-310 7X43
eight-97571-741 7X41
8-97571-639 6X39
EPT FTR 47210-2750 6X41
47210-2760 6X39
7X43
Nissan Front CK12 38110-95715(38110-90404) 6X41 CWA fifty three/PE6/RD8
Nissan REAR CK12 38110-90116(38110-90369) 6X41 CK12/PE6/RD8
38110-90115 6*37 CPB12
38110-90113/38110-9571 7*36 PD6
38110-91003/31th tooth six*forty one
38110-9571 6X41 CWB520NEW
38110-90502 6X41 CWB520NEW
38110-9571 5X37
38110-90501 5X37
38110-90707 7X39 RF8/DJ502
38110-90708 7X39 RF8/DJ502
38110-9571 6X39
38110-90503 6X39
38110-90006 7X39
38110-90007 7X39
HINO EPTT Wheel Pinion 41201-1382 7X45 FM226/SG
41201-1163 7X38 EM100
41203-1180 7X43 AKBUS
41201-1080 7X46
41201-1101 6X41 EF750/SG NUT BOLT
41201-4110 7X41
41201-3790 7X41
41201-4650 7X41
41201-4850 7X41
41201-2991 7X41
HINO EPTT Wheel and Pinion 41203-1811 7X44 H07C NEW
41203-2250 7X41 H07C/FL
41201-4571(41201-3070) 7X45 J08C 10-WHL
41201-4040 7X45
41211-2960 7X43

HangEPT EPTT Business EPTT, Ltd. is a EPTTized provider of a complete assortment of EPTs, sprockets, EPTs, EPT racks, v belt pulley, timing pulley, V-belts, couplings, EPTTd elements and so on.

Thanks to our sincerity in offering best support to our clientele, understXiHu (West EPT) Dis.Hu (West EPT) Dis. of your wants and overriding sense of duty toward filling buying requirements, we have acquired the EPTT of buyers around the world. Obtaining accrued valuable experience in cooperating with foreign consumers, our goods are promoting effectively in the American, European, South American and Asian markets.Our goods are manufactured by modern day computerized EPTTry and tools. Meanwhile, our merchandise are created in accordance to high quality stXiHu (West EPT) Dis.Hu (West EPT) Dis.rds, and complying with the intercontinental EPTd stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd conditions.

With many years’ encounter in this line, we will be EPTTed by our positive aspects in aggressive value, a single-time shipping and delivery, prompt response, on-hand engineering support and excellent soon after-revenue companies.

Furthermore, all our generation processes are in compliance with ISO9001 stXiHu (West EPT) Dis.Hu (West EPT) Dis.rds. We also can layout and make non-stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd merchandise to satisfy customers’ EPTT demands. EPTT and credit history are the bases that make a company alive. We will supply greatest solutions and higher good quality products with all sincerity. If you want any information or samples, please speak to us and you will have our soon reply.

  in San Luis Potosi Mexico  sales   price   shop   near me   near me shop   factory   supplier Truck Rear Axle Crown Wheel Pinion Gear for Truck Transmission manufacturer   best   Cost   Custom   Cheap   wholesaler

  in San Luis Potosi Mexico  sales   price   shop   near me   near me shop   factory   supplier Truck Rear Axle Crown Wheel Pinion Gear for Truck Transmission manufacturer   best   Cost   Custom   Cheap   wholesaler